Post Offer Free
ChinaUltrasonicCleanerOnlineMarketplacecompany  

Gold Index: 10031

You are here: home  > Strong Adhesion Epoxy Stone Adhesive Flexible Epoxy Glue For Shower Floor

Strong Adhesion Epoxy Stone Adhesive Flexible Epoxy Glue For Shower Floor 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: YY-233

 
Strong Adhesion Epoxy Stone Adhesive Flexible Epoxy Glue For Shower Floor<

 

Strong Adhesion Epoxy Stone Adhesive Flexible Epoxy Glue For Shower Floor

 

 

Description: Yunyan PVC Floor Glue is a sort of one-component dispersive water-base adhesive, of high initial viscidity and coating property. It is an ideal choice for binding various kinds of coiled or flaky homogeneous penetrative PVC floor.

 

Scope of application:

All kinds of PVC tile floor, applicable to the smooth and absorbency base plane, it can also be applied to the formation of ceramic tile, terrazzo, epoxy and other non absorbency base plane, paving below 2.8mm PVC homogeneity coil floor

 

Product features

1. Solventless and environmentally friendly;

2. Simple construction and economical dosage;

3. High initial viscosity;

4. Working time as long as 24 hours;

5. High workability;

6. Anti-plasticizer formula;

7. High resistance to extrusion and shock after solidification.

 

Solvent-free environmental protection, execute the national standard: GB18583-2008

“Indoor decoration materials-adhesive harmful material set limit”

Executive Germany standard DINENISO17895-2005

Component:acrylic ester copolymer

 

Technical parameters

(20-25,Relative air humidity 48-55)

Drying time

≤4 hours

The floor of weld

After about 24 hours    

Load carrying capacity

After about 72 hour

Dosage

7-9 m²/kg

Storage and Transportation Temperature

20 to 50 (anti-frosting)

Temperature resistance after solidification

0 to 50

packing

20kg/barrel

 

 

Treatment of base plane:

  1. The base plane must be smooth, firm, dry and clean, no sand without cracks. According to the standard testing and processing the base plane.
  2. After vacuum cleaner processing base, choose the appropriate interface agent and self-leveling leveling to process. Ensure the moisture content of the base plane and self-leveling ≤ 8%, scrape and brush glue coating.

 

Description of construction

  1. Brushing the coating evenly on the base plane surface with appropriate scraping teeth. it should be determined right drying time according to the amount of glue, weather conditions, basic factors, such as absorbent of the base plane and floor type(Glue liquid change from white to transparent).
  2. Laid floor, brush pressure and rolling on the whole laid area. And in 20 minutes later, brush or rolling pressure again to ensure the bonding effect.
  3. Using special glue to remove the wet residue and adhesive from the surface of the floor.

 

Important Notification:

  • This product at + 5 ~ + 30 , the humidity below 75 % and can store in the original packaging for 12 months. Have been opened packaging shall be immediately sealed tightly and used as soon as possible.
  • The best construction conditions: The temperature is 20 to 25 , air humidity below 75%.During installation process, too high or too low temperature will affect the adhesive open time and curing time.
  • It is used on a smooth, flat and have good absorptive base can increase the early bonding strength, shorten the construction time.

 

Health data:

Does not contain solvents, non-combustible, normal use without special protection. If accidentally splashed into eyes, rinse immediately with plenty of water for at least 15 minutes, serious should adopt medical treatment.

 

Waste Management:

Residual products may not be direct emissions, as a special waste disposal, empty containers can be recycled.

 

Storage period

Keep in a cool and dry place, unopened powder valid for one year.

 

Spec: 20kg/barrel

 

 

 

 

FOR OEM:

1. Brand Owner’s Authorization Letter is required to be issued & provided for the corresponding production and exportation;

2. Quality only based on the samples which the buyer provided or YUNYAN’s counter-sample confirmed by buyer.

In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

3. OEM MOQ: at least 1*20 feet container per item/color.

 

FOR DELIVERY:

Minimum Order Quantity:

100barrels

Price:

negotiation

Packaging Details:

Composite paper bag w/. Plastic bag inside

Delivery Time:

5-7days

Payment Terms:

Ex works

Supply Ability:

100, 000barrels/week

 

 

bigPhoto
 Mr. Mrs. Sunny Chen

Tel: 86-755-10023930
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

ChinaUltrasonicCleanerOnlineMarketplacecompany [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (214)